Before Use

-Please read all of the Instructions for Use and the Important Safety Guards carefully.

-Remove all packaging from the iron.

- Remove the soleplate protector.

-It is normal for a small amount of smoke and a light odor to be produced the first time it is

used. This will quickly disappear.

- Particles may emit from iron during first use. They are not harmful and sould disppear after the iron has been alowed.

Helpful Hints

- When ironing, start with fabrics that require a low tempera- ture setting (•) and finish with those which need the highest temperature (•••).

-Mixed fiber fabrics should be ironed on the temperature for the most delicate fabrics. For example a shirt that is 60 % cotton and 40 % polyester should be ironed at the (•) set- ting for synthetics.

-If spray starch is used, spray it onto the reverse side of the garment. Allow starch to penetrate before ironing by set- ting garment aside for 30 seconds.

-For best results, use a mesh type ironing board to allow excess steam to escape.

-For delicate fabrics, we recommend carrying out a test on an unobtrusive area of the garment such as an inner seam.

-Adhere to manufacturer recommendations on garment label.

3 Way Auto-Off

-If the iron is not moved while it isplugged in, an internal safety switch will turn it off.

- It will turn off in 8 minutes if left vertically or in 30 seconds if left on its soleplate or tipped over. A red flashing light indicates that the auto-off has been activated.

- To switch the iron on again, move the iron or gently shake it.

Auto off is not on/off switch.

Always unplug iron when it is not use.

Filling with Water

- Ensure the iron is unplugged.

- Slide the variable steam control completely to the left.

- Rest the iron on heel and tilt it foward approximately 1 inch. If the iron is equiped with a covered filling inlet, open the filling inlet by sliding the cover down.

- Hold the appliance upright so that the water inlet is horizontal.

-Fill with water (containing no additives) to

the max mark on the water tank. We recommend using water pitcher rather than filling under the tap.

-If you need to add water during ironing, UNPLUG the iron and follow the steps above.

-Ensure iron heats back to temperature after- wards, that means thermostat light will go out.

Page 2 Page 4
Page 3
Image 3
Rowenta DX1900 manual Before Use, Helpful Hints, Way Auto-Off, Filling with Water
Page 2 Page 4

DX1900 specifications

The Rowenta DX1900 is a high-performance steam iron designed to provide exceptional results while simplifying the ironing process. Known for its effectiveness and user-friendly features, the DX1900 is a popular choice among households seeking to maintain crisp and wrinkle-free clothes. This model is packed with advanced technologies, making it a standout in the crowded market of steam irons.

One of the main features of the Rowenta DX1900 is its powerful steam output. With a continuous steam rate of up to 40 grams per minute, this iron offers a consistent flow of steam that penetrates fabric deeply, ensuring stubborn wrinkles are eliminated with ease. For those more challenging areas, the DX1900 is equipped with a steam shot feature that delivers a concentrated burst of steam of up to 150 grams per minute, making short work of deep-set creases.

The Rowenta DX1900 also boasts a precision tip, which is designed to reach tight spaces and tricky areas such as collars, cuffs, and around buttons. This attention to detail helps ensure a thorough and efficient ironing experience. Additionally, the iron features a stainless steel soleplate that is non-stick and scratch-resistant, facilitating smooth gliding over garments of all types and providing durability over time.

One of the notable technologies included in the DX1900 is the anti-drip system, which prevents water from leaking when the iron is heated to lower temperatures. This ensures that no unwanted water stains appear on fabrics, allowing users to iron with confidence. The self-cleaning function helps maintain the iron's performance by removing mineral build-up, contributing to the longevity of the device.

Moreover, the DX1900 prioritizes safety with its automatic shutdown feature, which activates if the iron is left unattended for a certain period. This not only protects the iron from damage but also prevents potential accidents. The lightweight design of the iron enhances maneuverability and ease of use, making long ironing sessions less tiring.

In summary, the Rowenta DX1900 combines powerful steam performance, precision features, and user-friendly technology to redefine the ironing experience. Whether you are a seasoned user or someone looking to simplify your clothing care routine, the DX1900 stands out as an efficient and reliable choice for achieving immaculate results.
Top Page Image Contents