13 • Automatic electronic 3-position shut off
If, although switched on, the appliance is not moved, it will automatically switch off and the auto off light will blink after the following intervals (fig.17):
-After 30 sec., if the iron is standing on the soleplate or lying on its side.
-After 8 mins., if the iron is standing on its heel.
AFTER USE
14 • Emptying
Unplug the iron (fig.4), pour away remaining water (fig.18) and set steam control to 
.
Open and close the steam control several times (fig.19) to prevent the drip hole into the steam chamber from furring or blocking up.
15 • Storing
Allow the appliance to cool down before storing the iron standing on its heel (fig.20).
IMPORTANT Do not wind the cord around the hot soleplate. Never store your iron placed down on the soleplate (fig.20).
MAINTENANCE AND CLEANING
IMPORTANT Unplug and allow the iron to fully cool down before maintenance and cleaning.
16 • Anti-scale system
Your iron contains an
The
IMPORTANT Do not use descaling agents, as these damage the lining of the steam chamber and so may impair the steam function.
17 • Self Clean function
(prolongs the life of the iron)
The Self Clean function flushes dirt and scale particles out of the steam chamber. Fill the water tank with tap water up to the max mark and heat the iron to the ••• temperature. Unplug the iron and hold it over a sink horizontally. Hold the steam control into the Self
8
