BEFORE USE
MPlease read all of the instructions for use and the Important Safeguards carefully.
MRemove all packaging from the generator.
MThe first time the steam generator is used, it is normal for a small amount of smoke and a slight odor to be produced. It will quickly disappear.
MWhen starting, and while it is being used, the electric pump injects water into the boiler. It makes a noise but this is normal. If you are pressing on the steam control button at this time, you may lose a little steam for a few seconds.
HELPFUL HINTS
MBefore using the generator for the first time or if you have not used the steam function for a few minutes, press the steam button several times in a row while holding the iron away from your clothes. This will enable any cold water to be removed from the steam connection cord.
MWhen ironing start with fabrics that require a low temperature setting (●) and finish with those which need the highest temperature (● ● ●).
MMixed fiber fabrics should be ironed on the temperature for the most delicate fabric. For example a shirt that is 60% cotton and 40% polyester should be ironed at the (●) setting for synthetics.
MIf spray starch is used, spray it onto the reverse side of the garment. Allow starch to penetrate before ironing.
MFor best results, use a mesh type ironing board to allow excess steam to escape.
MFor delicate fabrics, we recommend carrying out a test on an unobtrusive area of the garment such as an inner seam.
FILLING THE WATER TANK
1.Place your steam generator on a stable, horizontal heat- resistant surface.
(1)
2.Remove the water tank by pulling the tabs upward (1).
3.Fill the water tank taking care not to exceed the maximum level (2).
(2)
