The iron soleplate
MIn normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner available at most stores.
MTo prevent scratching of the soleplate, do not iron over sharp objects (zippers, etc.).Do not place the iron on rough surfaces, e.g. metal iron support, which may scratch the soleplate. Place the iron on its rest on top of the base of the unit.
MAlways put the iron with the soleplate down on the iron rest, never place on its heel.
The base unitÊ
The iron and base can be cleaned with a damp cloth and wiped dry.
Never use household cleaners, descalers or solvents.
RINSING OUT THE BOILER
Be careful:
MTo ensure optimum steam performance, the boiler must be rinsed out after every 10 uses. If your tap water is hard, increase the frequency.
MDo not use any descaling agents as they could damage the generator.
1.Generator must be empty, unplugged and completely cold.
Allow to sit 2 hours before rinsing boiler.
2.Place your steam generator on the edge of your kitchen sink.
(11)
3.Remove the drain screw cover located on the side of the appliance (11).
(12) |
(13) |
4.Using a coin, unscrew the drain screw (12).
5.Holding your steam generator on its side, fill the boiler using a water pitcher with 8 oz. of water (13).
