(3)

4.Replace it securely on the base and push down to lock in place

(3).

The steam generator is designed to operate using tap water. Please review WATER RECOMMENDATIONS section for additional water information.

TURNING ON THE STEAM GENERATOR

(2)

(1)

(4)

1.Completely remove the power cord from its storage space before plugging in.

2.Press on the on/off switch (located on the front of the appliance) (1) the green light on the control panel flashes and the boiler heats up (2). It will take approximately 2 minutes to heat. The green “steam ready” light will stop flashing (4).

UNDERSTANDING THE CONTROL PANEL

MFlashing green lightÊ : the water is heating up in the boiler.

MContinuous green lightÊ : steam is ready for use.

MContinuous red lightÊ : the water tank is empty.

MBoiler reset button: to be activated after each refill.

USING YOUR STEAM GENERATOR

Warning: Steam produced is very hot. To avoid burns and scalding, never iron or steam clothes while they are being worn.

1. Set the temperature control dial for the type of fabric being ironed

(5).

(5)

Synthetics (low temperature)

Silk/Wool (medium temperature)

● ● Cotton/Linen (high temperature)

2. The iron temperature indicator turns on.

Page 4
Image 4
Rowenta Werke manual Turning on the Steam Generator, Understanding the Control Panel, Using Your Steam Generator