83 | PROGRAMMING THE MACHINE |
|
84 | PROGRAMMING THE MACHINE |
|
The keys
allow you to change the set options “ON” or “OFF”.
Temperature selection
With Royal Cappuccino a precise adjustment of the coffee temperature can be executed. Move the asterisk at the end of the line to the menu items
“Temp. l. coffee”, “Temp. coffee” or
time saving whenever the machine is often used. This function is not recommended in all other cases, because fresh ground coffee is by far better.
Press keys
to move the asterisk to item
“PREGRINDING”. Press ENT to activate this function.
Press keys | to move the asterisk to item | The following message will be displayed: |
| ||
“PROG.CAPUC.”. Press ENT to activate this | "STANDBY |
| " | ||
function: |
|
|
| ||
|
| "AFTER 0:00 | " | ||
The following message will be displayed: |
| ||||
| "11 PROG. CAPUC. | " | By means of the same keys | , select the | |
| "ON | " | suitable time and confirm the value throughENT | ||
|
|
| button. |
|
|
“Temp. s. coffee” and select it by means of the ENT key.
Depending on the selection, the following messages will be displayed:
"5 TEMP. L. COFFEE"
"MEDIUM "
The following message is displayed: |
|
"9 PREGRINDING | " |
"ON | " |
The keys
allow you to change the set
The keys
allow you to change the set options: “ON”, “OFF”.
Coffee counter
Press keys
to move the asterisk to item “TOTAL COFFEE” and select it by means of the
When the selected time is over the following message is displayed:
"ENERGY "
"SAVING "
| "6 TEMP. COFFEE | " | Hot water programming | |
| "MEDIUM | " | ||
| Whenever this function is enabled, the selected | |||
| "7 TEMP. S. COFFEE" | water amount is constantly dispensed. On the | ||
| contrary, whenever this function is disabled hot | |||
|
|
| water is dispensed until the user stops the | |
The keys | allow you to change the set options | dispensing. Hot water amount can only | ||
“Minimum”, “maximum”, “high”, | be programmed with programming | |||
mode enabled. | ||||
“medium” or “low”. |
| |||
|
| |||
Prebrewing function |
| - “PROG. H. WATER”. Press ENT to activate | ||
As soon as the coffee has been moistened, the | this function. | |||
pump stops for a while in order to allow a better | The following message will be displayed: | |||
utilization of the coffee powder. |
| |||
Move the asterisk at the end of the line to the |
| |||
ENT key. The following message will be displayed:
"12 TOTAL COFFEE "
"XX"
This value cannot be modified. Quit the menu by means of the ENT or ESC keys.
Descaling
Move the asterisk at the end of the line to menu item “Descaling” and select it by means of the ENT key.
The following message will be displayed:
The machine stops and can be switched on again by means of button 
“standby”.
Vending functions
Royal Cappuccino is equipped with a counter allowing the machine statistic analysis while detecting the different dispensing operations. It is also equipped with another counter which is able to stop the dispensing operations after a certain number. These functions are protected by a special access code.
By means of keys
move the asterisk to
menu item “PREBREWING” and select it by |
| "10 PROG. H. WATER" | ||
means of the ENT key. |
|
| "ON | " |
The following message will be displayed: |
|
|
|
|
"8 PREBREWING | " | The keys | allow you to change the set | |
options: “ON”, “OFF”. |
| |||
"ON | " |
| ||
"13 DESCALING
For descaling procedure, see page 92.
Timer
The timer enables the automatic switching off of the machine after a preset period, which can be
means of the same keys 
. On the contrary,
if the hot water selection key 
is pressed, the submenu can be quit.
The following messages will be displayed:
The keys
allow you to change the set
options “ON”, “OFF”,“LONG” (in the latter case the pump stop is longer).
Pre-grinding function
By activating this function, grinding occurs every time the doser is empty. So a ground coffee portion is always ready in the doser, allowing a
Cappuccino programming
Whenever this function is enabled, the same amount of cappuccino is constantly dispensed. On the contrary, whenever this function is disabled, cappuccino is brewed until the user stops the dispensing. Cappuccino amount can only be programmed with programming mode enabled.
set from 15 minutes to 12 hours after last dispensing. If after a few seconds coffee is brewed again, the timer is reset. If the value set is 0:00, the timer function is not activated and the machine does not switch off.
Move the asterisk at the end of the line to menu
item “Timer” by means of the keys
. Press ENT to select this item.
"CODE"
"****"
"1 LARGE COFFEE | " |
"TOTAL | " |
"1 COFFEE | " |
"TOTAL | " |