Royal Sovereign ARP- 1008 Troubleshooting, ARP-1008 / ARP-1010, Problem, Possible Reasons

Models: ARP- 1008

1 32
Download 32 pages 22.67 Kb
Page 13
Image 13
Troubleshooting

ARP-1008 / ARP-1010

Troubleshooting

Problem

Possible Reasons

 

- Check and reset the power plug. Wait 3 minutes and try to run the unit again.

 

- The batteries in the remote may need to be replaced. Replace the batteries and try to run the unit again.

Air Conditioner does not operate

- Make sure the plug is properly inserted into the outlet.

 

- The set temperature may be too close to room temperature. Lower the set temperature.

 

- The air outlet may be blocked. Check the air outlet and remove any items that may be found.

 

 

 

- Check the room for open doors or windows and close them.

 

- There may be another appliance in the room giving off heat. Check the room and turn off the appliance.

Air Conditioner runs but does not cool

- The air filter may be dirty. Check the filter and clean if necessary.

 

The air exhaust or intake may be blocked.

 

- The set temperature may be too high. Check the set temperature and reduce it if necessary.

 

 

Air Conditioner does not run

There may be excess water in the unit. Drain the unit.

and water full indicator is lit

 

 

 

13

Page 13
Image 13
Royal Sovereign ARP- 1008 owner manual Troubleshooting, ARP-1008 / ARP-1010, Problem, Possible Reasons