Operation
Before Use
•Check to make sure rubber drain plugs are securely plugged into the drain ports on the back of the unit to prevent water leaks
•Check to make sure that air conditioner has been properly vented out the window ( See Installation pg 7.)
•Check to make sure air conditioner is on a flat surface
•Conduct a Power Plug Check:
1.Press the RESET button on the power cord.
2.Plug cord into an electrical outlet.
3.Press the TEST button on the power cord. The RESET button should pop up.
4.Press the RESET button for use.
5.Do not use the air conditioner if the test fails. The green light on the power cord will turn on if the plug is working properly.
Note: If you turn the air conditioner off and immediately restart it, allow 3 minutes for the compressor to restart cooling. In the event of a power failure, wait 3 minutes before restarting unit.
Control Panel |
|
Buttons |
|
Power button | Timer button |
Sleep mode button | Fan speed button |
Mode button | Temperature / Timer up button |
Temperature / Timer down button | |
Indicator Lights |
|
Low fan speed | High fan speed |
Automatic mode | Cool mode |
Dehumidify mode | Fan only mode |
F
C
H
8