Part 2: Attaching exhaust hose
1.Hold the exhaust hose parallel to the floor with the hose connector positioned up and down
2.Line up the hose connector above the tabs on the exhaust outlet. Slide connector down into the tabs locking the connector in place.
Part 3: Installing window slider kit
1.Open the window and place the window slider on the inside edge of the window.
2.Adjust the window slider to the width of the window.
3.Insert a screw into the top of the window slider to secure it at the correct length.
4.Take window slider out and attach to exhaust hose by snapping the hose adapter into the hole on the window slider. outside.
5.Extend exhaust hose to desired length.
6.Place window slider and hose into the edge of the window.
7.Close window to secure slider.
Fig 2.
Make sure that the tabs on the window slider are facing
Fig 3. | Fig 4. |
|
7