RSA Lighting AR70 specifications Combolight, Next Generation Recessed Multi-LampFixture

DESCRIPTION

An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for downlighting and accent applications. Utilizes SIX (6) 12V AR70 lamps.

For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing and junction box are aluminum, trim assembly is steel with powder coated finish. Fixture utilizes a removable trim sleeve to provide a 0.75” flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate various ceiling thickness.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Integral electronic or magnetic low voltage transformers. Transformers and electrical are mounted in a separate metal enclosure box attached to the junction box with 18” of flexible conduit. Transformer enclosure includes a separated wiring compart- ment and six knockouts for conduit entry. Transformer enclosure features perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and transformer enclosure) is removable from the housing for easy maintenance.

E.... Lamps

Six (6) 12V AR70 lamps mounted in adjustable double gimbal. Lamp holders are removable and may be regressed 1” for additional cut-off. Lamps can accept up to three optical accessories (i.e. lens

+hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet action. Optional retractable arm is avail- able for lamp pulldown and extreme aiming. Double contact bayonet base sockets included.

F.... Mounting

A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 5.90” x 28.96”

COMBOLIGHT®

Next Generation

Recessed

Multi-Lamp Fixture

Six (6) Light 12V AR70

Remodel Housing w/ 0.75” Trim Flange

Double
Gimbal
9.27”			30.67”
45º x 45º
Adjust	7.95”
1.60”
6.15”		7.45”	29.37”
		Required	28.70”
		above	27.87”
		ceiling
24.66”			4.65”
Integral Low Voltage	9.25”	4.65”
Transformers
Separate Wiring Compartment			Thermal
NOTES:			Protector
De-Rated wattage labels are available.
12V Primary voltage is available.	18” flexible conduit
ORDERING INFORMATION

C6

R

T

Configuration			Lamp Type / Wattage Label
C6 = COMBOLIGHT			050A70 = 50 Watt max. AR70 12V
Recessed Six (6) Light
	Housing
	R =	Remodel

Power Supply

Voltage

1 = 120V

2 = 277V

Power Supply

E = Electronic Low Voltage

Transformer

M = Magnetic Low Voltage

Transformer

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Flange

T = 0.75” Trim Flange

Trim Finish

W = White

B = Black

S = Industrial Silver

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 022408

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031