Emptying Dry Tank
1
Disconnect power cord from outlet.
2
A 
2
1
Release latches. Remove powerhead.
Wet Mode Operation
1
Slide wet/dry selector right to expose wet port.
| ENGLISH |
2 |
|
U | 1 |
| |
| 2 |
Insert hose into “wet tank inlet” and turn clockwise to lock.
3 |
B |
4
B 
3
K 
I
U 
4 |
2 |
1 |
Remove inner tank and empty.
Reinstall inner tank.
Attach bent and/or straight wand and desired accessory. | Plug power cord into outlet. Turn power switch on. (Vacuum |
| cleaner is now ready for use.) Once complete, turn power |
Optional Increased Capacity | switch off and unplug power cord from outlet. |
|
Note: When using single tank configuration, it is not recommended to alternate between wet and dry modes.
5 |
A |
1 |
Reinstall powerhead. Fasten latches. (Vacuum cleaner is now ready for use.)
14
A |
|
B | 2 |
|
3 | 4 |
| |
1 |
|
For more capacity in wet mode, the inner tank can be removed. Release latches and remove powerhead and inner
tank. Turn powerhead over.
15
X |
|
|
Y | W | 3 |
| ||
1 |
| 2 |
|
| 4 |
Remove HEPA filter/HEPA foam sleeve. Replace with large foam filter. Reinstall powerhead. Fasten latches. (Vacuum cleaner is now ready for use.)
