RuggedCom manual Table of Contents, Example RS900W configurations

Table of Contents

1	Software Upgrade		4
	1.1	Overview	4
	1.2	Assumptions	4
	1.3	Software upgrade procedure	4
	1.3.1 Step 1: File unpack and preparation		4
	1.3.2 Step 2: File location		4
	1.3.3 Step 3: Verify the ROS Software version		4
	1.3.4 Step 4: Disable RSTP:		5

1.3.5Step 5: Upgrade the IEEE 802.11 (Wireless) daughter-card firmware on RS900W

	switch(es):		5
	1.3.6 Step 6: Reset the RS900W switch(es)		5
	1.3.7 Step 7: Login to the ROS console		5
	1.3.8 Step 8: Verify the IEEE 802.11 (Wireless) daughter-card firmware version:		5
2	Example RS900W configurations		6
	2.1	Configuration for WPA2 enabled “Access Point” operation	6
	2.2	Configure the RS900W for “Client / Bridge” operation	6
	2.3	Configure the RS900W for “Client / IP Bridge” operation	7

3

© 2007 RuggedCom Inc. All rights reserved Rev100