Runco CL-510 manual Basic Operation, Turning on the Power, Zoom/ Focusing, Selecting Video Memory

Runco CL-510/ CL-510LT User’s Manual

4. Basic Operation

Turning on the Power

■The Power LED lights orange when power is applied and the power switch is turned on.

■Press and hold the ON key on the remote control for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, then light solid green.

■" Searching…." will be displayed on the screen before the projector identifies the input signal. This message will remain on the screen until a valid signal is detected.

■If an incompatible input signal exceeds the range of the projector a "Not supportive timing" message will be displayed on the screen. This message will remain on the screen until you change the input signal.

Zoom/ Focusing

■Adjust the projection image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens.

Zoom out

Focus

Zoom in

Selecting Video Memory

■Press M1, M2, M3 buttons to recall settings in the memory.

■Press Default to select the default setting.

184. Basic Operation