10-3
EYE-QTMAutoconvergence
ON - SCREEN OPERATING INSTRUCTIONS
ACCESS TOEYE-QTM ON-SCREEN MENUS
After the EYE-QTM unit has been correctly installed in the projec-
tor, press the <ADJUST> button on the RCU (Remote Control
Unit) or the local keypad of the projector to enter the ‘Adjustment
mode’
(please refer to the projector Owner’s Manual). The EYE-QTM
path will be displayed in the menu:
Highlight EYE-QTM by pushing the or keys of the
control disc (on RCU).
Press the <ENTER> button to enter the EYE-QTM menu.
EYE-QTM MENU
The EYE-QTM menu will be displayed after the path EYE-QTM is
selected. Six items are available:
TOUCHUP.
AUTOCONVERGENCE.
QUICKAUTOPICTURE.
FULLAUTOPICTURE.
EYE-QTM SETUP.
EYE-QTM DIAGNOSTICS.
Choose EYE-QTM SETUP first to carry out the SETUP procedures.
Use EYE-QTM DIAGNOSTICS to check whether the EYE-QTM is
functioning normally.
EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with
then <ENTER>.
<EXIT> to return
or