Runco VX-8D operation manual Connections to the VX-8d and DHD Controller, Connector Panel Access

Installation

Proceed as follows to connect the DHD Controller to the VX-8d, your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, pull firmly on the cable access cover to open it.

3.6

Connections to the VX-8d and DHD Controller

Connector Panel Access

Digital Video Connection: Connect the HDMI Output of the DHD Controller to the DHD	Connecting the DHD
Input of the VX-8d as shown in Figure 3-10.	Controller to the VX-8d

RS-232
232-RS
DHD INPUT	AC
	AC
INPUT DHD

HDMI OUT

RS-232

OUT

Figure 3-10. Connecting the VX-8d to the DHD Controller

Runco VX-8d Installation/Operation Manual 29