Runco VX-8D operation manual RS-232 Connection from the DHD Controller to the VX-8d

Installation

RS-232 Connection: Connect the Display Control output from the DHD Controller to the RS-232input on the VX-8d. Use a standard, modular telephone cable with RJ11 plugs at both ends. On the VX-8d end, use the provided RJ11-to-DB9 adapter. This adapter is wired as shown in Figure 3-11.

To/From

DHD

Controller

				VX-8d
	XMT DATA	RCV DATA		RS-232
4			3	232-RS
3	RCV DATA	XMT DATA	2
2	SIG GND		5
1, 5, 6	NO CONNECTION		1, 4, 6,
			7, 8, 9

6-position RJ-11 Male

6

1

DB-9 Male

1

6

Figure 3-11. RS-232 Connection from the DHD Controller to the VX-8d

30 Runco VX-8d Installation/Operation Manual