settled unevenly.

 

recommended and settle

 

 

 

 

 

the laundry in the machine

 

 

 

 

 

evenly.

 

 

Your machine rests on a

 

Prevent your machine from

 

 

hard surface.

 

resting on hard surfaces.

 

 

 

 

 

 

 

 

FAULT

 

POSSIBLE CAUSE

 

REMOVING METHODS

 

 

 

 

 

 

 

 

 

 

 

It is not plugged in.

 

Plug machine in.

 

 

 

 

Fuse blown.

 

Replace the fuse.

 

 

 

 

Electricity cut-off.

 

Check mains power.

 

 

 

 

Start/pause button not

 

Press on start/pause

 

 

Your machine does not start.

pressed.

 

button.

 

 

Programme knob ‘stop’

 

Switch the programme

 

 

 

 

 

knob to the desired

 

 

 

 

position.

 

 

 

 

 

 

position.

 

 

 

 

 

 

 

 

 

 

The machine door is not

 

Close the machine door.

 

 

 

 

completely closed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water tap is turned off.

 

Turn your faucet on.

 

 

 

 

 

 

 

 

 

 

 

Water inlet hose may be

 

Check water inlet hose.

 

 

 

 

twisted.

 

 

 

 

 

 

 

 

 

Your machine does not

 

Water inlet hose

 

Clean water inlet hose

 

 

intake water.

 

clogged.

 

filters.

 

 

 

 

Valve inlet filter clogged.

 

Clean the valve inlet

 

 

 

 

 

filters.

 

 

 

 

 

 

 

 

 

 

The machine door is not

 

Close the machine door.

 

 

 

 

completely closed.

 

 

 

 

 

 

 

 

FAULT

POSSIBLE CAUSE

REMOVING METHODS

 

 

 

Excessive foam is formed in the

 

 

detergent drawer.

 

Press on Start/Pause button.

 

 

To eliminate foam formation,

 

 

mix a spoon of softener with

 

 

half litre of water, and pour the

 

Excessive amount of detergent

mixture in the detergent drawer.

 

used.

After 5-10 minutes, press on

 

 

Start/Pause button again. For

 

 

next washing operation, decide

 

 

the dose of detergent as

 

 

required.

 

 

 

 

 

Use detergents produced only

 

Wrong detergent used.

for automatic washing

 

 

machines in your machine.

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084 -29-

Page 29
Image 29
Russell Hobbs RH1250RTG, RH1250TW instruction manual Fault Possible Cause Removing Methods