Russound CAM6.6T-S1 PERIPH SETUP PerSu, Installation Menu, MEM NAME MemNm, BANK NAME BnkNm

INSTALLER

INSTALLATION MENU

The following items make up the Installation Menu:

PERIPH SETUP (PerSu) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu)

CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR)

MACRO EDITOR (MacEd) SYSTEM INFO (SInfo)

PERIPH SETUP (PerSu)

Peripheral Setup allows the CAM6.6’s optional internal source to be configured.

The following items can be found in the PERIPH SETUP menu:

MEM NAME (MemNm) BANK NAME (BnkNm) CONTROLLR ID (CtlId) REGION (Rgion)

FACTORY INIT (FInit) SYSTEM INFO (SInfo)

MEM NAME (MemNm)

NOTE: A memory preset must be created and saved before it can be named. Once it is saved, the preset’s Tuner #, Bank # and Memory # must be entered in the following procedure.

This procedure accesses a name entry field to enter a custom name for a memory preset. See

Periph Setup - Flow Chart on page 63

1. BANK # –Select the BANK # of the memory preset. (Bank#)

2.	MEMORY # –	Select the MEMORY # of the preset to be named.
	(Mem #)
3.	MEMORY NAME –	Use the volume up/down keys to select a character and left/right
	(MemNm)	keys to change a character position. A blinking cursor indicates
		placement of the character being entered. Names can be from 1
		to 5 characters in length. If adding names from 6-12 characters,
		it is suggested you use an optional UNO-S2 keypad.

BANK NAME (BnkNm)

This procedure accesses a name entry field to enter a custom name for each of the tuner’s six banks. See Periph Setup - Flow Chart on page 63

1. BANK # –	Select the BANK # of the memory preset.
(Bank#)

48