USER
INTERNAL SOURCE - AM/FM TUNER
UNO-LRC1 Remote Control
Selecting the tuner
To select the tuner, push and choose the source number preassigned to the AM/FM tuner (1), or use the UNO numeric source inputs at the bottom of the
Selecting the desired band
Push to toggle between AM/FM reception.
Frequency Scan
To scan, press and hold then release . The tuner scans through tuned stations with a
scanning, press again.
Selecting a Bank
To select a bank, press and hold for bank up
or for bank down.
Selecting the desired frequency
Use the Channel and or and
for manual tuning. To move quickly through the channels, press and hold the button for more than
1.5seconds. To directly select a station, enter the three- or
Frequency Seek
The SEEK function is performed by pressing and
releasing the Select or or . To seek
higher frequency station press . Press for lower frequencies. Tuning begins at the current fre- quency, seeks upward (or downward) and stops at the
next tuned station. Pushing or again con- tinues the SEEK function. Once the highest frequency is reached, the tuner continues SEEK mode at the lowest frequency.
Bank/Memory Presets
The AM/FM tuner has six banks of preset memory settings, and each bank holds six presets for a total of 36 possible presets.
Memory Preset Programming
1.Select a bank - press and hold or until the desired bank #
2.Select a station - tune to the desired frequency
with | , | , | or | . |
|
3.Press and hold a # button
Recalling a Memory Preset
Press and to scroll through a loop dis- play of all the configured memory presets for the cur- rently selected bank.
Mute
Press the button to mute/unmute the tuner audio output.
18