Russound CAM6.6T-S1 MULTIPLE CONTROLLERS WITH ST2 DUAL TUNER, Sample Configurations

SAMPLE CONFIGURATIONS

MULTIPLE CONTROLLERS WITH ST2 DUAL TUNER

Sharing an ST2 Dual Tuner with multiple CAM6.6 con- trollers (no built-in tuners)

The configuration below is suitable for 7 to 12 zones that can all access the ST2 Dual Tuner. This configura- tion uses RCA “Y” cables from the ST2 Tuner source outputs to connect to both CAM6.6 source inputs.

CAM6.6 (no tuner installed) - Controller Setup Menu: Controller ID = 1 Source Setup Menu: Basic Setup Procedure: Source # = 1; Source Name = Tuner 1; Command Type = Peripheral

Source # = 2; Source Name = Tuner 2; Command Type = Peripheral Output/Input Switch = Input

RCA cable connected from ST2 Tuner 1 audio output

to Source 1 input on CAM6.6 (1)

RCA cable connected from ST2 Tuner 2 audio output to Source 2 input on CAM6.6 (1)

CAM6.6 (no tuner installed) - Controller Setup Menu: Controller ID = 2 Source Setup Menu: Basic Setup Procedure: Source # = 1; Source Name = Tuner 1; Command Type = Peripheral

Source # = 2; Source Name = Tuner 2; Command Type = Peripheral Output/Input Switch = Input

RCA cable connected from ST2 Tuner 1 audio output to Source 1 input on CAM6.6 (2)

RCA cable connected from ST2 Tuner 2 audio output to Source 2 input on CAM6.6 (2)

ST2 Dual Tuner Back Panel

NEWMARKET, NH U.S.A.

ST2 Smart Tuner

LOOP

TUNER 2

LOOP

TUNER 1

Serial#

FM COAX

ANTENNA

AUDIO OUTPUT

FM COAX

ANTENNA

AUDIO OUTPUT

LINK

RS-232

KEYPAD PORTS

IR

L

R

IR

L

R

12VDC 1.5A

INTERFACE

IN

OUT

IN KOREA

MADE

RCA “Y” Cable

UNO-S1 Keypads

102.5102.5

RCA Cable RCA Cable

CAM6.6

CAM6.6 Back Panel

(Controller ID 1)

102.5102.5

UNO-S1 Keypads

CAM6.6

CAM6.6 Back Panel (Controller ID 2)

106