INSTALLER
INSTALLATION MENU
commands including other macros and delays. See Macro Editor - Flow Chart on page 74
1. MACRO ID – | Number of Macro up to 132 including any previously named |
(MacID) | macros. |
2. MACRO NAME – | Name of Macro (optional). |
(MacNm) |
|
3. COMMAND NUM – | Number of Command up to 10. |
(Cmd#) |
|
4. COMMAND TYPE – | Select the type of source command (e.g., CD, TV, etc.). |
(CmdTp) |
|
a. Selected: Learned IR | Choose Learned IR if the |
(LrnIR) | not support the source component. |
i. LEARNED SRC – | Select the learned source bank to be assigned to the source |
(LnSrc) | component. Procedure advances to KEY FUNCTION (step 6) |
b. Selected: Unassigned | Selected command and subsequent commands are cleared. |
(Unasg) | Procedure advances to COMMAND NUM (step 3) |
c. Selected: Default | Default selects the same device type and device code previously |
(Deflt) | setup in BASIC SETUP. Procedure advances to KEY FUNCTION |
| (step 6) |
d. Selected: Macro: |
|
(Macro) |
|
i. MACRO - | A macro can “call” another macro if a sequence of more than 10 |
(Macro) | commands is needed. |
ii. MACRO ID – | Enter the macro ID number. Menu advances to COMMAND NUM |
(MacID) | (step 3) |
e. Selected: Delay | Enter a 1- to |
(Delay) | next command in the macro. Procedure advances to COMMAND |
| NUM (step 3) |
f. All Other Selections: | Procedure advances to DEVICE CODE (step 5) |
5. DEVICE CODE – | Source component code for IR control. |
(DevCd) |
|
6. KEY FUNCTION – | Select a function (Play, etc.). |
(KeyFn) |
|
61
