Ryobi 4730301 manual Unpacking, Safety and International Symbols

SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers.The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

	DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious
	injury.
	WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or seri-
	ous injury.
	CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moder-
	ate injury. It may also be used to alert against unsafe practices that may cause property damage.
Note:	Advises you of additional information concerning the operation or maintenance of the equipment.

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.

SYMBOL	NAME	MEANING
	Wet Condition Alert	• Do not expose to rain or use in damp locations.
	No Hands Symbol	• Failure to keep your hands away from the blade
		will result in serious personal injury.
	Read the Operator’s Manual	• To reduce the risk of injury, the user must read and
		understand the operator’s manual before using this product.
	Eye Protection	• Always wear safety goggles or safety glasses with side
		shields and a full face shield when operating this product.

SAVE THESE INSTRUCTIONS

UNPACKING

Your new Wide Table Kit includes two 41 in. extension rails, plus the necessary brackets and connecting hardware required to make one wide support base and a rear extension table for your BT3100/BT3100-1 table saw. All you have to supply is the lumber required for table tops and table legs, plus the wood screws, nails, bolts, etc. required to secure the table legs to the table top.

Remove the parts from the box. Make sure that all items listed in the loose parts list are included.

Inspect all parts carefully to make sure no breakage or damage occured during shipping.

If any parts are damaged or missing, please call 1-800- 525-2579 for assistance.

WARNING:

If any parts are missing do not assemble the kit until the missing parts are replaced. Failure to do so could result in serious personal injury

3