Ryobi BC30 RY30160 Starting And Stopping, Operation, Start Position, Run Position, See Figures 21

OPERATION

STARTING AND STOPPING

See Figures 21 - 23.

TO START A COLD ENGINE:

DO NOT squeeze the throttle trigger until the engine starts and runs.

Lay the trimmer on a flat, bare surface.

PRIME - Press the primer bulb 7 times.

SET the start lever to the START position.

PULL the rope until the engine starts.

Wait 6-10 seconds, then squeeze the trigger to run.

NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.

TO START A WARM ENGINE: PULL the rope until the engine starts.

TO STOP THE ENGINE:

Press and hold the switch in the stop “ ” position until the engine stops.

IGNITION

SWITCH

TRIGGER

LOCK

THROTTLE

TRIGGER

Fig. 21

PRIMER BULB

IGNITION

SWITCH

TRIGGER LOCK

THROTTLE TRIGGER

Fig. 22

START POSITION

START LEVER

RUN POSITION

START LEVER

Fig. 23

18