WARRANTY

THE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS.

TECHTRONIC INDUSTRIES NORTH AMERICA, INC., LIMITED WARRANTY

FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF-ROAD ENGINES

The U.S. Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and Techtronic Industries North America, Inc., are pleased to explain the Emission Control System Warranty on your non-road or small off-road engine. In California, new small off-road engines must be designed, built, and equipped to meet the state’s stringent anti-smog standards. In other states, new 2000 and later model year non-road engines must be designed, built, and equipped at the time of sale to meet the U.S. EPA regulations for small non-road engines. The non-road engine must be free from defects in materials and workmanship which cause it to fail to conform with U.S. EPA standards for the first two years of engine use from the date of sale to the ultimate purchaser. Techtronic Industries North America, Inc., must warrant the emission control system on your non-road or small off-road engine for the period of time listed above provided there has been no abuse, neglect, or improper maintenance of your non-road or small off-road engine.

Your emission control system may include parts such as the carburetor or fuel injection system, the ignition system, and the catalytic con- verter. Also included may be hoses, belts and connectors, and other emission-related assemblies.

Where a warrantable condition exists, Techtronic Industries North America, Inc., will repair your non-road or small off-road engine at no cost to you, including diagnosis (if the diagnostic work is performed at an authorized service center for RYOBI® brand outdoor products), parts, and labor.

MANUFACTURER’S WARRANTY COVERAGE:

The 1995 and later small off-road engines are warranted for two years in California. In other states, 1997 and later model year non-road engines are also warranted for two years. If any emission-related part on your engine is defective, the part will be repaired or replaced by Techtronic Industries North America, Inc., free of charge.

OWNER’S WARRANTY RESPONSIBILITIES

(a)As the non-road or small off-road engine owner, you are responsible for the performance of required maintenance listed in your operator’s manual. Techtronic Industries North America, Inc., recommends that you retain all receipts covering maintenance on your non-road or small off-road engine, but Techtronic Industries North America, Inc., cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. Any replacement part or service that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the engine manufacturer.

(b)As the non-road or small off-road engine owner, you should be aware, however, that Techtronic Industries North America, Inc., may deny you warranty coverage if your non-road or small off-road engine or a part has failed due to abuse, neglect, improper maintenance, or unap- proved modifications.

(c)You are responsible for presenting your non-road or small off-road engine to an authorized service dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a Techtronic Industries North America, Inc., Customer Representative at 1-800-860-4050.

COVERAGE:

Techtronic Industries North America, Inc., warrants to the ultimate purchaser and each subsequent purchaser that your non-road or small off-road engine will be designed, built, and equipped at the time of sale, to meet all applicable regulations. Techtronic Industries North America, Inc., also warrants to the initial purchaser and each subsequent purchaser that your non-road or small off-road engine is free from defects in materials and workmanship which cause the engine to fail to conform with applicable regulations for a period of two years. The 1995 and later small off-road engines are warranted for two years in California. In all other states for 1997 and later model years, EPA requires manufacturers to warrant non-road engines for two years. These warranty periods will begin on the date the non-road or small off-road engine is purchased by the initial purchaser. If any emission-related part on your engine is defective, the part will be replaced by Techtronic Industries North America, Inc., at no cost to the owner.

Techtronic Industries North America, Inc., shall remedy warranty defects at any authorized RYOBI engine dealer or warranty sta- tion. Any authorized work done at an authorized dealer or warranty station shall be free of charge to the owner if such work deter- mines that a warranted part is defective. Any manufacturer-approved or equivalent replacement part may be used for any warranty maintenance or repairs on emission-related parts, and must be provided free of charge to the owner if the part is still under warranty. Tech- tronics North America, Inc., is liable for damages to other engine components caused by the failure of a warranted part still under warranty.

The California Air Resources Board’s Emission Warranty Parts List specifically defines the emission-related warranted parts. (EPA’s regula- tions do not include a parts list, but EPA considers emission-related warranted parts to include all the parts listed below.)

These warranted parts are: Carburetor, Spark Plug, Ignition, Air Filter, and Fuel Filter.

MAINTENANCE REQUIREMENTS

The owner is responsible for the performance of the required maintenance as defined by Techtronic Industries North America, Inc., in the operator’s manual.

LIMITATIONS

The Emission Control Systems Warranty shall not cover any of the following:

(a)repair or replacement required because of misuse or neglect, lack of required maintenance, repairs improperly performed, or replace- ments not conforming to Techtronic Industries North America, Inc., specifications that adversely affect performance and/or durability, and alterations or modifications not recommended or approved in writing by Techtronic Industries North America, Inc., and

(b)replacement of parts and other services and adjustments necessary for required maintenance at and after the first scheduled replace- ment point.

The Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C=50 hours, B=125 hours, and A=300 hours.

25

Page 25
Image 25
Ryobi CS30 RY30120 manual MANUFACTURER’S Warranty Coverage, OWNER’S Warranty Responsibilities, Maintenance Requirements

SS30 RY30140, CS30 RY30120, BC30 RY30160 specifications

The Ryobi SS30 RY30140, CS30 RY30120, and BC30 RY30160 are key members of Ryobi's extensive lineup of outdoor power equipment, designed for versatility and ease of use. These machines are built to tackle various landscaping tasks, making them ideal for both homeowners and professional landscapers.

The SS30 RY30140 is a robust string trimmer that stands out due to its lightweight design and ergonomic handle, allowing for extended use without causing fatigue. It features a powerful 30cc two-stroke engine that delivers reliable performance, ensuring that grass and weeds can be tackled efficiently. With its adjustable cutting head, users can easily switch between different cutting techniques, making it suitable for edging, trimming, and clearing overgrown areas. The dual-line feed ensures a consistent cutting length, providing precise results with every pass.

The CS30 RY30120 chainsaw is designed for those who require a reliable, powerful tool for cutting and pruning tasks. It boasts a 30cc engine that makes it easy to handle, while still providing adequate power for cutting through branches and logs. The chainsaw features a tool-less chain adjustment system, allowing users to quickly and easily adjust the tension of the chain without requiring any additional tools. This convenience enhances user experience and ensures safety by allowing for timely adjustments while working. The anti-vibration technology integrated into the design reduces operator fatigue, making it more comfortable for prolonged use.

The BC30 RY30160 is a versatile brush cutter that combines power and precision for tackling tougher vegetation. It is equipped with a strong 30cc engine and features a pivoting head, enabling users to easily shift between trimming and clearing modes. This versatile functionality allows for efficient navigation through dense brush, making it perfect for clearing trails or managing overgrown areas. The BC30 also features a double strap harness that distributes weight evenly, providing additional comfort and reducing fatigue during extended work sessions.

All three models incorporate Ryobi’s innovative Easy Start technology, allowing for quick and effortless starts with minimal resistance. Ryobi’s commitment to user-friendly design ensures that even first-time users can operate these tools effectively. Additionally, these models are backed by a robust warranty and reputable customer service, further reinforcing Ryobi's dedication to quality and customer satisfaction.

In summary, the Ryobi SS30 RY30140, CS30 RY30120, and BC30 RY30160 offer a perfect blend of power, comfort, and versatility, making them essential tools for any outdoor maintenance task. Their thoughtful engineering and features cater to various user needs, ensuring that lawn care is efficient and enjoyable.