Features, Product Specifications | Ryobi BE321VS specs

FEATURES

PRODUCT SPECIFICATIONS

Belt Size	3 in. x 21 in.
Sanding Surface	16.5 sq. in.
No Load Speed	775 - 1,150/min.

Input	120 V, 60 Hz, AC only, 6.0 Amps
Net Weight	8.8 lbs.

DUST

COLLECTION BAG

LOCK-ON

BUTTON

TRACKING

KNOB

REAR

HANDLE

SWITCH

TRIGGER

FRONT

HANDLE

DRIVE

ROLLER

BELT TENSION
RELEASE LEVER		SANDING
		SANDING
FRONT		BELT
FRONT
ROLLER	VARIABLE SPEED	Fig. 1
	CONTROL DIAL	Fig. 1

8

Image 8

Ryobi BE321VS manual Features, Product Specifications

Contents

OPERATOR’S Manual Save this Manual for Future Reference Table of Contents Introduction General Safety Rules Electrical SafetyPersonal Safety Work Area Specific Safety Rules Service Symbols Symbol Name DESIGNATION/EXPLANATION Symbol Signal Meaning Cord Length Wire Size A.W.G ElectricalDouble Insulation Electrical Connection Features Product Specifications Assembly Setting the Belt Sander Speed OperationApplications Selecting Sanding Belts Proper Hand Placement Variable SpeedTurning ON/OFF the Sander To F Position sander as shown To INSTALL/CHANGE Sanding BeltUnplug your sander Locking on the Sander Operating the SanderTo lock-on the sander Excessive pressure will result in the following To Adjust Sanding Belt Tracking To empty dust bag To install/remove dust bagDust BAG Lubrication MaintenanceGeneral Maintenance Timing Belt Replacement See Figures 11 Service Model NO. and Serial no