11
TOOLS NEEDED
The following tools (not included) are needed for making adjustments or installing the blade:
Fig. 3
PHILLIPS SCREWDRIVER
SMALL COMBINATION
SQUARE
LOOSE PARTS
MITER GAUGE
HEX KEY,
2.5 mm
SAW TABLE
Fig. 4
FLAT HEAD
SCREW (3)
WING
SCREW
WORKLIGHT
Hex Key, 2.5 mm ...........................................................1
Miter Gauge ...................................................................1
Saw Table with Table Aligning Bolt ................................1
Wing Screw ...................................................................1
Flat Head Screw ............................................................3
Worklight .......................................................................1
Switch Key ....................................................................1
Operator’s Manual (not shown) .....................................1
SWITCH
KEY
The following items are included with the tool:
WARNING:
The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.
FLATHEAD SCREWDRIVER
ADJUSTABLE WRENCH
HEX KEY, 4 mm