Ryobi CSB130 Features, Know Your Circular SAW, Applications, Switch, Electrical Connection

FEATURES

KNOW YOUR CIRCULAR SAW

See Figure 1.

Before attempting to use your saw, familiarize yourself with all operating features and safety requirements.

APPLICATIONS

(Use only for the purpose listed below)

■Cutting all types of wood products (lumber, plywood, paneling).

WARNING:

If any parts are missing, do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

SWITCH

Your saw is equipped with a pre-travel safety switch which reduces the possibility of accidental starting. When you depress the switch, you will notice the saw will not start until you reach the pre-travel position. You must depress the switch fully to activate the saw.

ELECTRICAL CONNECTION

Your circular saw has a precision-built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz only. Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your saw does not operate when plugged into an outlet, double-check the power supply.

WARNING:

Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

DEPTH OF

CUT ADJUSTMENT

(DEPTH ADJUSTMENT KNOB)

BLADE WRENCH

UPPER BLADE	SPINDLE LOCK BUTTON
	(MODELS CSB130 AND CSB130JS)
GUARD
	TRIGGER
	SWITCH

	VIEWING
LOWER BLADE	WINDOW
GUARD HANDLE
BASE
ASSEMBLY	45
	0
BLADE

BLADE WRENCH	BEVEL CUT ADJUSTMENT
STORAGE AREA
	(BEVEL ADJUSTMENT KNOB)	Fig. 1

WARNING:

The operation of any circular saw can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.

Page 6