MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

WARNING:

To prevent accidental starting that could cause possible serious personal injury, turn off the tool, remove the switch key, and unplug the drill press before performing any maintenance or adjustment.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

�After using the drill press, clean it completely and lubricate all sliding and moving parts. Apply a light coat of automotive- type paste wax to the table and column to help keep the surfaces clean.

LUBRICATION

nLower spindle to maximum depth and oil moderately once every three months.

nOil the column lightly every two months.

nIf cranking becomes difficult, grease gear rack lightly. The ball bearings in the tool are permanently lubricated.

MOTOR/ELECTRICAL

The induction motor is easy to maintain but must be kept clean. Do not allow water, oil, or sawdust to accumulate on or in it. The sealed bearings are permanently lubricated and need no further attention.

HEAD ASSEMBLY AND MOTOR HOUSING

Frequently blow out any dust that may accumulate inside the head assembly and/or motor housing.

PULLEYS

See Figure 25.

Should you feel an unusually high level of vibration, the pul- leys may not be tightly secured on the motor and/or spindle shafts. To make sure the pulleys are properly seated and tight, locate the set screw on each of the pulleys. Tighten each set screw with the hex key.

PULLEY

SET SCREWS

Fig. 25

GEAR RACK

Periodically lubricate the worm gear and gear rack in order to keep the vertical movement smooth and to help prolong the life of the drill press.

BATTERIES

Check the laser batteries regularly to avoid deterioration. Remove the batteries if you will not be using the laser for an extended time.

23

Page 22 Page 24
Page 23
Image 23
Ryobi DP102L manual Maintenance
Page 22 Page 24

DP102L specifications

The Ryobi DP102L is a highly regarded drill press that provides both novice and experienced woodworkers with a reliable and robust tool for various projects. Known for its versatility and power, this drill press excels in both function and design.

One of the main features of the Ryobi DP102L is its 10-inch swing, which allows for the drilling of larger workpieces without any hassles. The adjustable table can easily be tilted and locked to accommodate angled drilling, enhancing the versatility for different applications. This feature is particularly valuable in woodworking, metalworking, and other crafts that require precision.

The motor is another focal aspect, equipped with a powerful 1/2 HP motor that operates at speeds of 620 to 3100 RPM. This range allows users to choose the optimal speed for their specific drilling task, whether it involves using larger bits or fine-tuning for intricate designs. The variable speed control adds a layer of convenience and efficiency, ensuring that users can tackle a variety of materials with ease.

One groundbreaking technology featured in the Ryobi DP102L is its laser guide system. This innovative addition projects a laser beam onto the workpiece, enabling users to see exactly where the drill bit will make contact. This feature eliminates guesswork, allowing for precision drilling and enhancing overall accuracy. The laser guide is especially useful when working with delicate or intricate pieces that demand attention to detail.

Additionally, the DP102L has an integrated depth stop, which permits users to pre-set the maximum drilling depth. This characteristic ensures uniformity in drilled holes, making it an essential feature for projects that require consistent results. The depth stop mechanism is straightforward and easily adjustable, catering to both beginners and seasoned artisans.

The Ryobi DP102L also emphasizes user comfort and safety. The heavy-duty base is designed to minimize vibrations while ensuring stability during operation, which is critical for safety and accuracy. Furthermore, the ergonomically designed handle allows for comfortable grip and control, even during extended periods of use.

In summary, the Ryobi DP102L drill press combines powerful performance, innovative technology, and user-friendly features, making it an ideal choice for anyone in need of a reliable drilling solution. Its combination of versatility, precision, and comfort ensures it can handle a wide array of applications, establishing it as a valuable addition to any workshop.
Top Page Image Contents