Manuals / Ryobi / Power Tools / Drill

Ryobi DP102L manual Changing Speeds, Drive Belt Spindlemotor Pulleypulley Tension Bolt

Models: DP102L

1 26

Download 26 pages 3.32 Kb

Page 22

Image 22

ADJUSTMENTS

CHANGING SPEEDS

See Figure 24.

The spindle speed is determined by the location of the belt on the pulleys inside the head assembly. The speed chart located on the cover inside the head assembly shows the recommended speed and pulley configuration for each drill- ing operation.

To change the pulley configuration:

nLift head assembly cover from front to open.

nLoosen the tension bolt.

nRemove the drive belt.

nReposition the belt according to the speed chart.

nRetighten the tension bolt.

DRIVE

BELT

SPINDLEMOTOR

PULLEYPULLEY

TENSION

BOLT

Fig. 24

Page 22

Image 22

Ryobi DP102L manual Changing Speeds, Drive Belt Spindlemotor Pulleypulley Tension Bolt

Contents

OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionGeneral Safety Rules Read ALL InstructionsComponent is in Contact with the Workpiece Fluence of DRUGS, ALCOHOL, or ANY MEDICA- TionSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Extension Cords Speed and WiringElectrical Electrical ConnectionGlossary of Terms Anti-Kickback Pawls radial arm and table sawsWorklight ON/OFF Switch Switch KEY FeaturesProduct Specifications Handle Adjustment Vise BaseTools Needed AA Batteries Adjustment Handle Table Assembly HEX KEY Feed HandlesLoose Parts ChuckColumn Assembly HEX Bolt AssemblyAttaching Column Assembly to Base UnpackingAssembly Gear Rack Base Collar Threaded Hole Lock Handle Installing Table AssemblySlot Adjustment Handle SET Screw Assembly ShaftChuck Scrap Wood Spindle Head Assembly Installing CHUCK, Head ASSEMBLY, and Feed HandlesINSTALLING/CHANGING Worklight Bulb BulbMounting the Drill Press INSTALLING/CHANGING Laser BatteriesBattery Compartment Cover AA Batteries Head Assembly Mounting Bolts BaseLaser Housing CHECKING/ADJUSTING Laser AlignmentLaser Adjustment Knob Operation Power SwitchApplications SELF-EJECTING Chuck KEY Installing and Removing BitsChuck KEY KEY Hole Assembly Lock Handle Wrong Table RotationDrilling Tips DrillingVise HEX Bolt Adjusting Table Bevel AdjustmentsAdjusting Table Height Adjusting Depth GaugeChanging Speeds Drive Belt Spindlemotor Pulleypulley Tension BoltMaintenance Troubleshooting Problem Possible Cause SolutionPage Service Model NO. and Serial no