Manuals / Ryobi / Power Tools / Sander

Ryobi DS1100 specifications Operation, Applications, Installing Sandpaper, Unplug Your Sander

Models: DS1100

1 12
Download 12 pages 14.46 Kb
Page 6
Image 6

OPERATION

WARNING:

Your sander should never be connected to power supply when you are assembling parts, making adjustments, assembling or replacing sandpaper, cleaning, or when not in use. Disconnecting sander will prevent accidental starting that could cause serious personal injury.

APPLICATIONS

(Use only for the purposes listed below)

■Sanding on wood surfaces.

■Removing rust from and sanding steel surfaces.

■Polishing and buffing.

■Scraping paint or glue from window panes.

INSTALLING SANDPAPER

See Figure 2.

The rubber pad on your sander accepts pressure sensitive adhesive backed sandpaper. Precut triangle shaped sandpaper in assorted grits are available from your local Ryobi dealer.

■UNPLUG YOUR SANDER.

WARNING:

Failure to unplug your sander could result in accidental starting causing possible serious personal injury.

■If installing sandpaper for the first time, proceed as follows. If replacing sandpaper, remove old sandpaper by peeling it off rubber pad, then proceed as follows.

■Carefully peel paper backing from new sandpaper.

■Position sandpaper into place, then carefully press sticky side of sandpaper on rubber pad.

ADHESIVE

BACKING

RUBBER PAD

PRESSURE SENSITIVE

 

ADHESIVE BACKED SANDPAPER

Fig. 2

WARNING:

Never use your detail sander for wet sanding or liquid polishing. Failure to comply can result in electrical shock causing serious injury or worse.

WARNING:

Before connecting your sander to power supply source, always check to be sure switch is not in ON position. Failure to do so could result in accidental starting of your sander resulting in possible serious injury.

WARNING:

Do not allow familiarity with your sander to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

WARNING:

If any parts are missing do not operate your sander until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

Page 6

Page 5 Page 7
Page 6
Image 6
Ryobi DS1100 specifications Operation, Applications, Installing Sandpaper, Unplug Your Sander, Adhesive Backing Rubber PAD
Page 5 Page 7

DS1100 specifications

The Ryobi DS1100 is a versatile and powerful stationary drill press that stands as a testament to Ryobi's commitment to innovation and quality in power tools. Designed for both professional users and DIY enthusiasts, the DS1100 offers a range of features that enhance precision, efficiency, and versatility, making it suitable for various applications.

One of the standout features of the Ryobi DS1100 is its robust motor, providing 1/3 horsepower. This powerful motor delivers consistent performance across a variety of materials, including wood, metal, and plastics. The drill press is equipped with a variable-speed mechanism, allowing users to adjust the speed from 620 to 3,100 RPM. This variable speed control is essential for achieving optimal results, as different materials require different drilling speeds for efficient operation.

The 8-inch swing capacity of the DS1100 is another notable characteristic, allowing users to work with larger workpieces without compromising accuracy. The table on the drill press is adjustable, providing versatility in terms of height and angle. It can tilt up to 45 degrees, enabling users to perform bevel cuts and other angled operations effortlessly. The work table also features a built-in laser guide system, ensuring precise alignment and enhancing the drill press's accuracy.

Safety is a priority for Ryobi, and the DS1100 is equipped with a safety switch that prevents accidental starts. This feature provides users with peace of mind, especially when working in busy workshops. Additionally, the drill press includes a robust base with pre-drilled holes, allowing for stable mounting on workbenches for safe operation.

The Ryobi DS1100 is designed for ease of use, featuring a user-friendly depth adjustment system that allows users to set drilling depths quickly and accurately. This feature is particularly beneficial for repetitive drilling tasks, as it reduces setup time and improves overall productivity.

In terms of build quality, the DS1100 is constructed with durable materials to withstand the rigors of regular use. Its sturdy design ensures minimal vibration during operation, leading to enhanced precision and control.

In conclusion, the Ryobi DS1100 is an exceptional drill press that combines power, precision, and user-friendly features. Its variable speed control, laser guide, adjustable work table, and safety mechanisms make it a reliable choice for anyone looking to tackle a wide range of drilling tasks with confidence and ease. Whether for home projects or professional use, the DS1100 is a valuable addition to any workshop.