Features | Ryobi HD501 specification

FEATURES

	KNOW YOUR HAMMER DRILL	APPLICATIONS
	See Figure 1.	(Use only for the purposes listed below)
	Before attempting to use your hammer drill, familiarize	■ Hammer drilling in concrete and masonry.
	yourself with all operating features and safety requirements.	■ Drilling in wood.
		■ Drilling in wood.
	WARNING:	■ Drilling in ceramics, plastics, fiberglass, and laminates.
	WARNING:	■ Drilling in both hard and soft metals.
		■ Drilling in both hard and soft metals.
	Do not allow familiarity with your hammer drill to make you	■ Using driving accessories, such as driving screws with
	careless. Remember that a careless fraction of second is	screwdriver bits.
	sufficient to inflict severe injury.	■ Mixing paints.
		■ Mixing paints.

AUXILIARY

HANDLE ASSEMBLYMODE

SELECTOR

DEPTH

GAGE ROD

LOCK-ON BUTTON

TWO-SPEED

CHUCK GEAR SHIFTVARIABLE SPEED KNOB

CONTROL SELECTOR

SWITCH

TRIGGER

CHUCK KEY

CHUCK KEY

STORAGE

Fig. 1

Page 7

Image 7

Ryobi HD501 specifications Features, Auxiliary Handle Assemblymode Selector Depth Gage ROD

Contents

Thank YOU for Buying a Ryobi Hammer Drill Save this Manual for Future Reference Introduction Table of Contents Symbol Meaning Safety Alert Symbol General Safety RulesRules for Safe Operation Tool Use and Care Specific Safety Rules Symbol Name DESIGNATION/EXPLANATION Symbols Packing List ElectricalUnpacking Extension Cords Auxiliary Handle Assemblymode Selector Depth Gage ROD Features Operation Speed Auxiliary Handle AssemblyVariable Speed Variable Speed Control Selector Decrease To Adjust Drilling Mode Using Depth Gage RODDrill BIT Unplug Your Hammer Drill To Install BitsTo Remove Bits Right Wrong LOW TWO-SPEED Gear Shift KnobDrilling Do not Shift Speeds While Tool is Running To Retighten a Loose Chuck Chuck RemovalMallet Chuck Jaws HEX KEY Screwdriver General MaintenanceLubrication Page Ryobi TECHNOLOGIES, INC Owners Operating Manual