Belt Replacement, See Figures 23, Belt Cover Screw

MAINTENANCE

BELT REPLACEMENT

See Figures 23 and 24.

When replacing the belt, use recommended replacement belt only, Ryobi part number HPL50K-03.

■Unplug your planer.

WARNING:

Failure to unplug your planer could result in accidental starting causing serious injury.

■Remove belt cover screw, then remove the belt cover.

BELT COVER

SCREW

■Force the old belt from the small pulley by turning in the direction shown. As you turn the belt, pull and work it off the small pulley until it has been com- pletely removed from both pulleys.

■Install the new belt over the large pulley. As you turn the belt, push and work it onto the small pulley until it is in place.

■Replace the belt cover. Install belt cover screw and tighten securely.

BELT

SMALL PULLEY

LARGE PULLEY

BELT COVER

Fig. 23

Fig. 24

Page 16

Image 16

Ryobi HPL50 manual Belt Replacement, See Figures 23, Belt Cover Screw, Belt Small Pulley Large Pulley Belt Cover

Contents

Thank YOU for Buying a Ryobi Power Planer Save this Manual for Future Reference Table of Contents Introduction General Safety Rules Work Area Specific Safety Rules Service Symbols Symbol Name Designation / Explanation Symbol Meaning Features SwitchTrigger Switch Know Your Planer Product Specifications Loose Parts Chip Exhaust and Collection OperationPreparing for Operation Correct Wrong To Adjust Planing Depth Depth Adjustment Knob To Increase Cutting Depth To DecreaseGeneral Cutting Chamfering Edge Planing Rabbet Cuts Maintenance Power CordGeneral Depth Rabbet CUT Width Edge of Blade Cleaning Chip Exhaust and Emptying Chip BAG Blade ReplacementExtension Cords Lubrication Blade Blade Holder Pull Blade From BladePush Blade Into Blade Holder Blade Securing Screws Belt Replacement See Figures 23Belt Cover Screw Belt Small Pulley Large Pulley Belt CoverPage Extension Cord Caution HPL50