Features, Product Specifications, On I /OFF O

FEATURES

Collet	1/8 in.
Switch	Variable Speed

CLEANING

BRUSH

TELESCOPING

TOOL HANGER

SPINDLE

LOCK

CLAMP-ON

BASE

No Load Speed	......................10,000-35,000 r/min. (RPM)
Input	120 V, 60 Hz, AC only, 1.2 Amps

SWITCH

DIGITAL

DISPLAY

SPEED CONTROL

BUTTONS

PLUNGE CUTTING

ACCESSORY

FLEX SHAFT

Fig. 1

Image 8

Contents

OPERATOR’S Manual Save this Manual for Future Reference Warranty Introduction General Safety Rules Electrical SafetyPersonal Safety Work Area Specific Safety Rules Service Symbols Name DESIGNATION/EXPLANATION Symbol Signal Meaning Cord Length Wire Size A.W.G ElectricalDouble Insulation Electrical Connection On I /OFF O FeaturesProduct Specifications Assembly Operation ApplicationsTurning the Rotary Tool ON/OFF Changing Collets Accessory Chart Quantity Accessory Application See Figures 4 Installing AccessoriesRemoving Accessories Using the Mandrels See Figures 6 Slower Speeds Balancing AccessoriesSelecting the Right Speed Discs EngravingCutter Rubber To operate the rotary tool Operating the Rotary ToolLearning to use the rotary tool See Figures 12 Telescoping Tool Hanger with Clamp on BaseOperating the Flex Shaft To operate the rotary tool using the flex shaft To install accessories into the flex shaftTo remove accessories from the flex shaft Using the Plunge Cutting Accessory To assemble the plunge cutting accessoryTo install the plunge cutting accessory on the rotary tool To use the plunge cutting accessory Lubrication MaintenanceGeneral Maintenance Page Service Model NO. and Serial no