IMPORTANT SAFETY INSTRUCTIONS

Make sure all guards, straps, deflectors and handles are properly and securely attached.

Use only the manufacturer’s replacement string in the cutting head. Do not use any other cutting attachment, for example, metal wire, rope, or the like. To install any other brand of cutting head to this string trimmer can result in serious personal injury.

Never operate unit without the grass deflector in place and in good condition.

Maintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 30 in. or more above the ground.

Store idle appliances indoors - When not in use, string trimmer should be stored indoors in a dry, locked place out of the reach of children.

Never use blades, flailing devices, wire or rope. Unit is designed for line trimmer use only. Use of any other accessories or attachments will increase the risk of injury.

Inspect area to be cut. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in cutting head.

Keep the air vents clean and free of debris to avoid overheating the motor. Clean after each use.

Stop the unit and disconnect the power source when not in use. Carry the unit with the motor stopped.

Store out of the reach of children.

Do not hang unit so that the switch trigger is depressed.

Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not charge battery tool in rain, or damp or wet location. Following this rule will reduce the risk of electric shock.

Do not use battery-operated appliance in rain.

Remove or disconnect battery before servicing, cleaning or removing material from the gardening appliance.

Use battery only with charger listed. For use with 18V nickel-cadmium and lithium-ion battery packs. See Tool/ Appliance/Battery Pack/Charger Correlation Supplement 987000-432.

Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.

Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.

Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

For best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store outside or in vehicles.

Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also.

4 — English

Page 6
Image 6
Ryobi P2002 manuel dutilisation Important Safety Instructions

P2002 specifications

The Ryobi P2002 is a versatile and powerful addition to any DIY enthusiast's tool collection. Powered by Ryobi's One+ battery system, this cordless drill/driver excels in delivering consistent performance for various home improvement tasks.

One of the notable features of the Ryobi P2002 is its compact and lightweight design. Weighing in at just 3.2 pounds, this drill is easy to maneuver in tight spaces, making it ideal for overhead tasks or intricate projects. Moreover, the ergonomic handle provides a comfortable grip, reducing fatigue during extended use.

The P2002 boasts a powerful motor that delivers up to 1,600 RPM, which allows users to tackle a wide range of drilling and driving applications. It also features a two-speed gearbox, enabling speed optimization—0-440 RPM for precise control during low-speed tasks and 0-1,600 RPM for high-speed drilling. This flexibility ensures that users can efficiently switch between various materials, including wood, metal, and plastic.

Additionally, the Ryobi P2002 is equipped with a ½-inch keyless chuck, allowing for quick and effortless bit changes without the hassle of manual tightening. This feature saves time and enhances convenience when switching between bits, especially during challenging projects.

The drill also includes an integrated LED work light. This feature illuminates the workspace, making it easier to see in dimly lit areas or when working at odd angles. Coupled with its adjustable torque settings, the P2002 ensures that users can drive screws and drill holes with precision, reducing the risk of stripping screws or damaging materials.

Another significant advantage of the Ryobi P2002 is its compatibility with the broader Ryobi One+ system. This means that users can interchange batteries across a range of Ryobi tools, offering versatility and efficiency in powering their entire toolset.

In summary, the Ryobi P2002 is a reliable and powerful drilling solution with an ergonomic design, variable speeds, and essential features like a keyless chuck and an LED work light. Its integration into the One+ ecosystem further enhances its practical applications for both seasoned DIYers and novice users alike, making it an excellent choice for various home improvement challenges.