MAINTENANCE
REPLACING AND CLEANING AIR FILTER
See Figures 18 and 19.
For proper performance and long life, keep air filter clean.
1. Remove the air filter cover by pushing down on the latch with your thumb while gently pulling on the cover.
2. Remove the filter, clean it in warm soapy water. Rinse and let dry completely. For best performance, replace annually.
3. Install the filter, align tabs, push in, and make sure the latches are locked into place.
FUEL CAP
WARNING:
A leaking fuel cap is a fire hazard and must be replaced immediately.
The fuel cap contains a
SPARK PLUG
This engine uses a Champion
TRANSPORTING
Allow the engine to cool; empty the fuel tank and secure the unit from moving before transporting.
STORAGE
STORAGE (LESS THAN 1 MONTH)
1. Clean all foreign material from the trimmer. Store it in a
2. Abide by all ISO and local regulations for the safe storage and handling of gasoline. Excess fuel should be used up in other
STORAGE (1 MONTH OR LONGER)
1.Drain all fuel from tank into a container approved for gasoline. Run engine until it stops.
2.Clean all foreign material from the trimmer. Store it in a
3.Abide by all ISO and local regulations for the safe storage and handling of gasoline. Excess fuel should be used up in other
LATCH
PULL COVER
TO OPEN
Fig. 18
FILTER
AIR FILTER
COVER
Fig. 19