ASSEMBLY
MUFFLER GUARD ASSEMBLY
See Figure 6.
1.Remove muffler guard and two screws from the owner's kit.
2.Attach the muffler guard to the rear housing.
NOTE: Make sure the bent end of the muffler guard fits securely into the opening of the rear housing.
3.Using the torx wrench supplied, install the two screws and tighten securely.
REAR HOUSING
TORX
WRENCH
SCREWS MUFFLER
GUARD
BENT END OF
MUFFLER GUARD
OPENING IN REAR
HOUSING
Fig. 6
9
