ASSEMBLY INSTRUCTIONS
ATTACHING AND REMOVING THE VACUUM BAG
Attaching
1.Attach the vacuum bag to the vacuum bag hook on the blower/vacuum tube (Fig. 3).
INSTALLING THE SHOULDER HARNESS
1.Push the strap through the center of the buckle.
2.Pull the strap over the cross bar and down through the slot in the buckle (Fig. 6).
Vacuum Bag Hook
Fig. 3
2.Slide the vacuum bag tube over the debris exhaust tube on the housing. Push the tube until the latching tabs on both sides click into place, securing the bag on the unit (Fig. 4).
Latching Tabs
Debris Exhaust Tube
Vacuum Bag Tube
Vacuum Bag
Zipper
Fig. 4
Removing
1.Press the latching tabs on both sides of the vacuum bag tube and pull the vacuum bag down from the unit (Fig. 5).
2.Detach the vacuum bag from the vacuum bag hook.
Latching Tabs
PRESS IN
PRESS IN
Clip
Fig. 6
3.Snap the clip on to the support fitting (Fig. 7).
Support Fitting
Clip
Fig. 7
4.While standing in the operating position adjust length to fit the operator’s size. Pull tab to lengthen, pull strap to shorten (Fig 8).
Fig. 8
Fig. 5
8