OPERATING INSTRUCTIONS
CONNECTING THE POWER CORD

Use a minimum 25 foot (7.6 m.) long, 16AWG, outdoor electrical cord when using this unit. Other sizes include:

MINIMUM WIRE SIZE FOR EXTENSION CORDS FOR

120 VOLT APPLIANCES USING 0-12 AMPS

Cord length (ft.)

25

50

100

150

 

 

 

 

 

Wire size (AWG)

16

16

16

14

 

 

 

 

 

WARNING: To reduce the risk of electrical shock, this

unit has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord.

This unit plug will only fit into a polarized extension cord in one orientation. If the plug does not fully fit into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord.

A polarized extension cord will require the use of a polarized wall outlet. This plug will only fit into a polarized wall outlet in a specific orientation. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the unit plug, extension cord receptacle, or extension cord plug in any way.

1.Secure the extension cord to the motor housing as shown (Fig. 9). This prevents accidental removal of the electrical cord.

2.Plug the female end of the electrical cord into the receptacle at the back of the unit (Fig. 10).

Receptacle

Fig. 10

STARTING/STOPPING INSTRUCTIONS

This unit is equipped with a three-way (OFF/ LOW/ HIGH) switch (Fig. 11):

•Slide the switch all the way down for OFF.

•Slide the switch up to the first click for LOW.

•Slide the switch up to the second click for HIGH.

Once the unit is plugged in, stand in the operating position (Fig. 12). Slide the power/speed switch to LOW or HIGH to start the unit. To stop the unit, slide the switch to OFF (Fig. 11).

HIGH

LOW

OFF

Fig. 9

Fig. 11

9