Ryobi RGBV3100 ENGINE WILL NOT START, ENGINE WILL NOT IDLE, ENGINE WILL NOT ACCELERATE, ENGINE LACKS POWER OR STALLS WHEN UNDER LOAD, UNIT WILL NOT BLOW OR VACUUM

TROUBLESHOOTING

ENGINE WILL NOT START

C A U S E

Empty fuel tank

Primer bulb wasn't pressed enough Engine flooded

Old or improperly mixed fuel Fouled spark plug

A C T I O N

Fill fuel tank

Press primer bulb fully and slowly 5-7 times

Use starting procedure with choke control in the RUN position, Pg. 11

Drain fuel tank / Add fresh fuel mixture Replace or clean the spark plug

ENGINE WILL NOT IDLE

C A U S E	A C T I O N
Air Filter is Plugged	Replace or clean the air filter
Old or improperly mixed fuel	Drain fuel tank / Add fresh fuel mixture
Improper carburetor adjustment	Adjust per instruction Pg. 18

ENGINE WILL NOT ACCELERATE

C A U S E

Old or improperly mixed fuel Improper carburetor adjustment

A C T I O N

Drain fuel tank / Add fresh fuel mixture

Take to an authorized service dealer for carburetor adjustment

ENGINE LACKS POWER OR STALLS WHEN UNDER LOAD

C A U S E

Old or improperly mixed fuel Improper carburetor adjustment

A C T I O N

Drain fuel tank / Add fresh fuel mixture

Take to an authorized service dealer for carburetor adjustment

UNIT WILL NOT BLOW OR VACUUM

C A U S E	A C T I O N
Bag Full	Empty Bag. See Empty the Vacuum Bag.
Blocked Tube	Clear Blockage. See Clearing a Blocked
	tube/Impeller.
Blocked Impeller	Clear Blockage. See Clearing a Blocked
	tube/Impeller.
Damaged Impeller	Take unit to an authorized service dealer

20