OPERATION
ATTACHING ADHESIVE SANDING DISCS
See Figure 2.
nUnplug the sander.
nPeel the paper backing from the sanding disc.
nAlign the holes in the sanding disc with the holes in the backing pad.
NOTE: Line up the holes in the sanding disc with the holes in the backing pad in order for the dustless feature to function properly.
nPress the sticky side of the sanding disc against the backing pad as firmly as possible.
NOTE: It is recommend that you clean the backing pad occasionally by brushing it lightly with a small brush. Dust buildup on the backing pad could cause the sanding disc to not stick properly.
ATTACHING HOOK AND LOOP SANDING DISCS
See Figure 3.
nUnplug the sander.
nPeel the paper backing from the conversion pad.
nAlign the holes in the conversion pad with the holes in the backing pad.
NOTE: Line up the holes in the conversion pad with the holes in the backing pad in order for the dustless feature to function properly.
nPress the sticky side of the conversion pad against the backing pad as firmly as possible.
nAlign the holes in the hook and loop sanding disc with the holes in the conversion pad.
NOTE: Line up the holes in the sanding disc with the holes in the conversion pad in order for the dustless feature to function properly.
nPress the fuzzy side of the sanding disc against the conversion pad as firmly as possible.
NOTE: You can reuse hook and loop type sanding discs for the life of the sanding abrasive. We recommend that you clean the conversion pad occasionally by brushing it lightly with a small brush to provide for their best adhesion.
ADHESIVE
SANDING DISC
BACKING PAD
HOOK AND
LOOP SANDING
DISC
CONVERSION
PAD
BACKING PAD
Fig. 2
Fig. 3
10
