ASSEMBLY
MOUNTING THE TABLE TO A WORK
SURFACE
See Figure 10a and 10b.
Follow these directions to mount the table to a work surface.
QPlace the router table right side up on a sturdy work surface, e.g., work stand, workbench, counter top.
QMark the holes with a pencil.
QRemove the router table.
Q Drill four holes through the work surface.
QPlace the router table back on the work surface, aligning the holes in the table legs with the holes in
the work surface.
NOTE: Position the router table surface at approximately hip height.
QInsert four bolts (not included,
and tighten securely with lock washers and hex nuts (not included).
NOTE: If you plan to transport the router table to different locations, we recommend that you attach it permanently to a mounting board that you can easily clamp to a work surface.
Fig. 10a
Fig. 10b
12
