| ASSEMBLY |
TO ATTACH THE SWITCH BOX |
|
See Figure 3 | AC (4) |
4.Place the router table on its legs.
5.Use a #2 Phillips screwdriver to attach switch box (G) to the switch box bracket with 3 self tapping screws (AF).
AE (4) | AD (4) |
AF (3)
G
AF
Fig. 3
To attach screws, washers and nuts for mounting router
See Figure 4
6.Place the 4 flange nuts (U) in the 4 countersink holes of the tabletop.
7.Insert the 4 countersink screws (AC) through holes in table top. Tighten securely with the 4 hex nuts (AD) placing the 4 washer (AE) between the nuts (AD) and the tabletop. Use an adjustable wrench or a combination wrench (size 10 mm) to tighten the nuts (the detail in figure 4 shows the finished assembly).
8.Press the 4 caps (K) to cover the heads of the countersink screws.
NOTE: Press the caps down until they are flush with table top.
CAUTION:
If you choose not to use the universal router mounting system, simply remove the associated hardware (AD, AE, U, AC), but keep the caps (K) in place.
K
AC
U
AE 
AD
Fig. 4
11
