OPERATION

INSTALLING BATTERY PACK

See Figure 7.

Follow these directions when installing the battery pack.

Place battery pack on the Speed Saw.

Align raised rib on battery pack with groove in saw's battery port.

Make sure the latches on each side of the battery pack snap in place and that battery pack is secured on the tool before beginning operation.

REMOVING BATTERY PACK

See Figure 7.

Follow these directins when removing the battery pack.

Locate latches on side of battery pack and depress both sides to release battery pack from the Speed Saw.

Remove battery pack from the Speed Saw.

CAUTION:

When placing battery pack on your Speed Saw, be sure raised rib on battery pack aligns with groove in saw’s battery port and latches snap in place properly. Improper assembly of battery pack can cause damage to internal components.

STARTING/STOPPING SPEED SAW

See Figure 8.

Follow these directions when starting and stopping the Speed Saw.

To start Speed Saw: Depress the switch to the I position.

To stop Speed Saw: Depress the switch to the O position.

CAUTION:

We suggest that you practice with your Speed Saw before installing a bit and making cuts.

OPERATING SPEED SAW

See Figure 9.

Follow these directions when operating the Speed Saw.

Hold Speed Saw firmly with both hands.

Start Speed Saw.

Tilt Speed Saw at a 45o angle.

Plunge bit into material using guide ring as a pivot.

Raise Speed Saw slowly to a 90o angle.

Begin cutting.

BATTERY PACK

DEPRESS

LATCHES

DEPRESS

LATCHES

Fig. 7

TO START SPEED

SAW

TO STOP SPEED

SAW

Fig. 8

Fig. 9

11