TROUBLESHOOTING | |
|
|
|
|
CUTTING HEAD WILL NOT ADVANCE LINE |
|
C A U S E | A C T I O N |
Cutting head bound with grass | Stop the unit and clean cutting attachment |
Cutting head out of line | Refill with new line |
Inner reel bound up | Replace the inner reel |
Cutting head dirty | Clean inner reel and outer spool |
Line welded | Disassemble, remove the welded section |
| and rewind the line |
Line twisted when refilled | Disassemble and rewind the line |
Not enough line is exposed | Push the Bump Knob and pull out line until |
| 4 inches (102 mm) of line is outside of the |
| cutting attachment |
|
|
CUTTING LINE ADVANCES UNCONTROLLABLY |
|
C A U S E | A C T I O N |
Oil in cutting head | Clean the cutting attachment |
If further assistance is required, contact your authorized service dealer.
SPECIFICATIONS |
|
|
|
|
|
STRAIGHT SHAFT TRIMMER |
|
Unit Weight | . . . . . . . . . . . . . . . . . . 3 lbs. (1.36 kg.) |
Cutting Mechanism | SpeedSpool® Dual String Cutting Head |
Line Spool | . . . . . . . . . . . . . . . Bump Line Releaser |
Line Spool Diameter | . . . . . . . . . . . . . . . 3 inches (76.2 mm) |
Trimming Line Diameter | . . . . . . . . . . . 0.080 inches (2.03 mm) |
Cutting Path Diameter | . . . . . . . . . . . . . . . 15 inches (38.1 cm) |
11