Save this Manual for Future Reference | Ryobi TR31 instruction

OPERATOR’S MANUAL

LAMINATE TRIMMER - MODEL TR31

DOUBLE INSULATED

SPECIFICATIONS:

Maximum Cutter Diameter		1-3/8 in. (34.9 mm)
Collet		1/4 in. (6.4 mm)

Horsepower		3/4

Rating	120 volts, 60 Hz AC only, 3.8 amperes

No Load Speed		23,000 RPM

Power Cord		10 ft. (3 m)

Net Weight		3.0 lbs. (1.4 kg.)

THANK YOU FOR BUYING A RYOBI LAMINATE TRIMMER.

Your new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire owner’s manual before using your new trimmer.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your trimmer properly and only for what it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1

Ryobi TR31 specifications Save this Manual for Future Reference, Thank YOU for Buying a Ryobi Laminate Trimmer

Contents

Thank YOU for Buying a Ryobi Laminate Trimmer Save this Manual for Future Reference Typical Application Double Insulation Rules for Safe Operation Work Area Additional Rules for Safe Operation Unpacking Features ON-OFF Switch OFF Brush CAP Base AdjustmentsWrench Collet NUT Subbase Collet Wing Bolt Indicator Points INSTALLING/REMOVING CuttersTo SET Depth of CUT Unplug Your Trimmer Operation Depth of CUT TOO Slow FeedingTOO Slow TOO Fast Depth Width CUT 1ST. Pass 2ND. Pass Extension Cords Direction of Feed and ThrustSee Figures 8 Trimmer Feed Direction Think Safety by Thinking Ahead Accessories See Figures 12 Trimming with Subbase AccessoryWorkpiece See Figures 14 Routing Grooves Parallel to AN Edge Maintenance Operators Manual Laminate Trimmer TR31