![](/images/backgrounds/278363/bga.png)
10
FEATURES
KNOW YOUR COMPOUND MITER SAWSee Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
14 AMP MOTORThe saw has a powerful 14 amp motor with sufficient power
to handle tough cutting jobs. It is made with all ball
bearings, and has externally accessible brushes for ease
of servicing.
10 in. BLADEA 10 in. blade is included with the compound miter saw.
It will cut materials up to 3-1/2 in. thick or 5-1/2 in. wide,
depending on the angle at which the cut is being made.
BEVEL LOCK KNOBThe bevel lock knob securely locks the compound miter
saw at desired bevel angles. Positive stop adjustment
screws have been provided on each side of the saw arm.
These adjustment screws are for making fine adjustments
at 0° and 45°.
BLADE WRENCH STORAGESee Figure 1.
A blade wrench is packed with the saw. One end of the
wrench is a phillips screwdriver and the other end is a hex
key. Use the hex key end when installing or removing blade
and the phillips end when removing or loosening screws. A
storage area for the blade wrench is located in the saw’s base.
“D” HANDLESee Figure 2.
For convenience when carrying or transporting the miter saw
from one place to another, a “D” handle has been provided.
To transport, turn off and unplug the saw, then lower the
saw arm and lock it in the down position. Lock saw arm by
depressing the lock pin.
ELECTRIC BRAKEAn electric brake has been provided to quickly stop blade
rotation after the switch is released.
LASER GUIDEFor more accurate cuts, a laser guide is included with your
miter saw. When used properly, the laser guide makes
accurate, precision cutting simple and easy.
MITER FENCEThe miter fence on the compound miter saw has been
provided to hold the workpiece securely against when
making all cuts.
Fig. 3
Fig. 2
SAW ARM LOCKED IN DOWN POSITION
MITER LOCK
HANDLE
LOCK
PIN
SPINDLE
LOCK
BUTTON
SWITCH
TRIGGER
PADLOCK
SWITCH
TRIGGER
Fig. 4
“D” HANDLE