Loose Parts

The following items are included with the tool:
 Miter Lock Handle	 Blade Wrench
 Dust Bag	 AAA Batteries
 Work Clamp	 Operator’s Manual

DUST BAG

WORK

CLAMP

AAA

BATTERIES

BLADE

WRENCH

MITER

LOCK HANDLE

Fig. 6

WARNING:

The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.

Page 12

Image 12

Contents

OPERATOR’S Manual Save this Manual for Future Reference Warranty Introduction General Safety Rules Read ALL Instructions Blade Coasts After Being Turned OFF Specific Safety Rules  Before Making a CUT, be Sure ALL ADJUST- Ments are Secure Specific Safety Rules Symbols Symbol Signal Meaning Electrical Double InsulationElectrical Connection Extension Cords Glossary of Terms Features Product SpecificationsSwitch Trigger Lower Blade Guard Dust BAG Bevel Lock Knob Blade Miter Wrench Fence Base Know Your Compound Miter SAW AMP MotorBevel Lock Knob Blade Wrench Storage Tools Needed Loose Parts Assembly UnpackingMounting Holes Trace Holes To install the work clamp Dust BAGWork Clamp Tighten Installing Batteries for Laser Aligning the Laser Guide LineBatteries Compartment Cover Screw Laser Line To Install / Replace the Blade See Figures 13Spindle Lock Button Blade Bolt Cover Outer Blade Squaring the SAW Blade to the Fence See Figures 15Socket Head Screws Fence Miter View of Blade Square with Fence Miter Scale Indicator Fence Indicator Screw Bevel Scale Squaring the Blade to THE MITER Table See Figures 19Blade Combinationmiter Square Table Miter Operation ApplicationsTo Cross CUT Cross CUT Indicator To Bevel CUTSee Figures 24 Bevel Scale To Compound Miter CUT See Figures 26Compound Miter CUT To Support Long Workpieces 45 X 45 Compound Miter CUT Long Workpiece Workpiece Supports COMPOUND-ANGLE Settings for Popular Structures Cutting Compound MitersPitch Number of Sides Cutting Crown Molding Laying Molding Flat on the Miter TableCeiling Fence Right SIDE, Outside Corner Miter Table Inside Fence Cutting Warped Material Clamping Wide WorkpiecesSee Figures 30 Wrong Adjustments Pivot Adjustments Travel Pivot AdjustmentBevel Pivot Adjustment Positive Stop Adjustments To Adjust the Laser Guide Laser Assembly Laser Adjustment Screw Maintenance General MaintenanceBrush Replacement Brush CAP Assembly Service Model NO. and Serial no

Ryobi TS1344L manual Loose Parts

Models: TS1344L

LOOSE PARTS