Manuals / Ryobi Outdoor / Lawn and Garden / Trimmer

Ryobi Outdoor RY52002 manual Idle Speed Adjustment, Maintenance, Chain Oiler, See Figure

Models: RY52002

1 26

Download 26 pages 59.56 Kb

Page 17

IDLE SPEED ADJUSTMENT

MAINTENANCE

IDLE SPEED ADJUSTMENT

See Figure 25.

If the chain turns at idle, the idle speed screw needs ad- justing on your trimmer engine. Turn the idle speed screw counterclockwise to reduce the idle RPM and stop the chain movement. If the saw chain still moves at idle speed, contact a service dealer for adjustment and discontinue use until the repair is made.

WARNING:

The saw chain should never turn at idle. Turn the idle speed screw counterclockwise to reduce the idle RPM and stop the chain, or contact a service dealer for ad- justment and discontinue use until the repair is made. Serious personal injury may result from the saw chain turning at idle.

IDLE

SPEED SCREW

CHAIN OILER

See Figure 26.

nUse Premium Bar and Chain Oil. It is designed for chains and chain oilers and is formulated to perform over a wide temperature range with no dilution required.

nRemove the cap and carefully pour approximately 8 oz. of bar and chain oil into the chain oiler tank.

nReplace the cap and tighten securely.

nCheck and refill the chain oiler tank every time the engine is fueled.

NOTE: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the oil pump, bar, or chain.

CHAIN OILER TANK

REPLACE

CAP

REMOVE

CAP

Fig. 26

Fig. 25

17

Image 17

Ryobi Outdoor RY52002 manual Idle Speed Adjustment, Maintenance, Chain Oiler, See Figure, Idle Speed Screw

Contents

PC30 PRUNER/TRIMMER OPERATOR’S MANUALRY52002 SAVE THIS MANUAL FOR FUTURE REFERENCEINTRODUCTION TABLE OF CONTENTSREAD ALL INSTRUCTIONS GENERAL SAFETY RULESSPECIFIC SAFETY RULES FOR PRUNER USE SPECIFIC SAFETY RULESSPECIFIC SAFETY RULES FOR TRIMMER USE REFUELINGSYMBOL SYMBOLSNAME DESIGNATION/EXPLANATIONSAVE THESE INSTRUCTIONS SERVICESYMBOLS SYMBOL SIGNALPRODUCT SPECIFICATIONS FEATURESSTARTER GRIP CHAIN OILER TANK CAP ENGINE SWITCH THROTTLE TRIGGERASSEMBLY FEATURESENGINE SWITCH KNOW YOUR PRUNER/TRIMMERCONNECTING THE POWER HEAD TO THE INSTALLING THE SHOULDER STRAPATTACHING THE “J” BARRIER HANDLE PRUNER ATTACHMENTCHAIN OILER INSTALLING THE GRASS DEFLECTOR ON THE STRING TRIMMER ATTACHMENTFUELING AND REFUELING PREMIUM EXACT MIXPREPARATION FOR PRUNER CUTTING OPERATIONBASIC CUTTING PROCEDURE See FiguresOPERATING THE TRIMMER LIMBING AND PRUNINGOPERATION See FiguresTO ADVANCE THE CUTTING LINE MANUALLY TO ADVANCE THE CUTTING LINECUTTING TIPS GRASS DEFLECTOR LINE TRIMMING CUT-OFF BLADESTARTING AND STOPPING POSITION FOR STARTINGENGINE SWITCH TRIGGER LOCK STARTER GRIP ENGINE SWITCH PRIMER BULB TRIGGER LOCK THROTTLE TRIGGERGENERAL MAINTENANCE MAINTENANCECHAIN TENSION See FiguresMAINTENANCE REPLACING THE BARSee Figures CHAINMAINTENANCE IDLE SPEED ADJUSTMENTCHAIN OILER See FigureHOW TO SHARPEN THE CUTTERS CHAIN MAINTENANCEMAINTENANCE DEPTH GAUGE SETTINGMAINTENANCE SPOOL REPLACEMENTTo install the spool retainer NEW PREWOUND SPOOLMAINTENANCE STRING REPLACEMENTSee Figures To remove the spool retainerREPLACING AND CLEANING AIR FILTER CLEANING THE EXHAUST PORT AND MUFFLERSPARK ARRESTOR FUEL CAPPROBLEM TROUBLESHOOTINGCAUSE REMEDYLIMITED WARRANTY STATEMENT WARRANTYMANUFACTURER’S WARRANTY COVERAGE WARRANTYOWNER’S WARRANTY RESPONSIBILITIES MAINTENANCE REQUIREMENTSTHIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER CALL US FIRSTWARRANTY EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LISTSERVICE CALIFORNIA PROPOSITIONHOW TO ORDER REPAIR PARTS OPERATOR’S MANUAL