FEATURES
KNOW YOUR PRUNER/TRIMMER
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
ENGINE SWITCH
The engine switch controls the ignition system. The switch must be in the ON (I) position for the engine to start and run.
“J” BARRIER HANDLE
Using the J” Barrier handle allows better control of the pruner to maximize operator safety.
PRIMER BULB
The priming bulb pumps fuel from the fuel tank to the car- buretor. This is necessary only when starting a cold engine or after refueling an engine that has run out of fuel.
SHOULDER STRAP
The shoulder strap helps support the weight of the pruner during use.
START LEVER
The start lever opens and closes the choke valve in the carburetor.
STARTER GRIP
The starter grip is used for starting the engine.
THROTTLE TRIGGER
The throttle trigger is used for starting the pruner, and also for controlling blade rotation.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to heed this warning could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
PACKING LIST
Power Head Assembly Pruner Attachment Trimmer Attachment
Hex Screw
Flat Washer Wing Nut Lock Washer
Curved Shaft Grass Deflector Scabbard
Scrench (5/8 in. x 3/4 in.)
8 oz. Bar and Chain Oil Bottle of
Bolt
Nut Shoulder Strap
“J” Barrier Handle Assembly:
“J” Barrier Handle
Top and Bottom Clamp Short Bolt
Long Bolt
Flat Washers (2)
Lock Washers (2) Nuts (2)
Operator’s Manual Warranty Registration Card
8
