S-Cam CS1300.22, CS1000.22 manual Shut-down procedure

Shut-down procedure

Shut-down1. Turn off the power switch on the pressure washer.

2.Relieve pressure on line by pulling trigger gun.

3.Shut off water supply and disconnect garden hose.

4.Be sure to check for water leaks or oil leaks that should be repaired before the next oper- ation.

Storage 5. If you are going to store the machine for extended periods of time in cold climates be sure to anti-freeze the equipment. A 50% anti-freeze solution may be drawn in through the inlet of the pump using a short remnant of garden hose. This fluid should be run through the pump. When the fluid is discharged from the pump discharge your machine is winterized. Do

not allow machine to freeze.

Pump The pump oil should be changed after the first 50 hours of operation. Then change every year after that for average use. Oil should be changed more frequently for extensive use or use in dusty areas or areas with high moisture.

Filters Water filters, hoses, and fittings should be checked prior to every operation for cleanliness, leaks, and needed repair or replacement.